| Presented in Partnership with: | |||
 |
 |
 |
 |
Search Results
The 55th William Blum Lecture, Modeling and Simulation for the Finishing Industry
Author: Dr. Keith Legg
Issue: Nov, 2021The 55th William Blum Lecture. As Dr. Legg watched the changes in industry over the past decade or so, he has seen modeling and simulation move from one industry to another. Seeing how and where it is used elsewhere, he concludes that modeling could be more widely and profitably used in the surface finishing industry.
 |
 |
 |
 |
 |
| Home | Subscribe | Regulations | Compliance Assistance | News | Resources | Resource Locators | Directories | Online Training | About | Search | Contact | NASF.org |
The information contained in this site is provided for your review and convenience. It is not intended to provide legal advice with respect to any federal, state, or local regulation.
You should consult with legal counsel and appropriate authorities before interpreting any regulations or undertaking any specific course of action.
Please note that many of the regulatory discussions on STERC refer to federal regulations. In many cases, states or local governments have promulgated relevant rules and standards
that are different and/or more stringent than the federal regulations. Therefore, to assure full compliance, you should investigate and comply with all applicable federal, state and local regulations.